Soft aluminum wafer

1. Numerical control is fully automatic. The production line starts from the uncoiling of the coil to the completion of the blanking of the whole coil of materials. In the middle, there is no need for manual contact with any labor and materials, and there is no need for any adjustment. It fundamentally eliminates the hidden dangers of production safety and product quality of ordinary punch punching.

2. The line can use coil material to directly produce wafers without longitudinal and transverse cutting of coil material, which reduces the production process, reduces the production cost, reduces the possibility of damaging the surface of coil material, and ensures that the produced wafers are free of oil stain and scratch.

3. The servo system is used to minimize the distance from the raw material to the edge of the coil, so as to make full use of the raw material and reduce the distance from the raw material to the edge of the coil to the minimum.

4. The production speed can reach 40-55 tablets per minute, which improves the production efficiency.

5. Due to the modular die design, when converting the wafer production specification, the conversion time can be reduced to less than 15 minutes. Wafers can be produced with diameters ranging from 85 mm to 750 mm.