Aluminum plate production Low price aluminum plate-manufacture,factory,supplier from China

The company's prompt delivery, high quality and low price, service and thoughtful.

advantage(1) Good processability: the positive grade aluminum oxide plate has strong decorative property and moderate hardness. It can be easily bent and formed, and can be continuously pressed at high speed. It is convenient to directly process into products without complex surface treatment, which greatly reduces the product production cycle and reduces the product production cost.(2) Good weather resistance: standard thickness oxide film (3 μ m) The anodized aluminum plate can be used indoors for a long time without discoloration, corrosion, oxidation and rust.

Shandong Pingyin Chengye plate Co., Ltd. is a set of aluminum and aluminum alloy production and operation in one of the integrated enterprise, The main products are aluminum and aluminum alloy plate, aluminum coil, aluminum strip, aluminum foil, aluminum bar, aluminium pipe, aluminum wire, aluminum ingots and other products through the ISO9001: 2000 quality system certification. The company's prompt delivery, high quality and low price, service and thoughtful.

AI≈99.5%　Si<0.2%　Cn<0.04%　Zn<0.04%比　重：2.7 g/cm3硬　度：65－125Hv规　格：φ0.6mm-φ2.0mm

Classification according to different aluminum sheet alloys1. Ordinary aluminum alloy pattern plate: the aluminum alloy pattern plate processed with 1060 aluminum plate as the plate base can adapt to the ordinary environment with low price. Usually, this kind of patterned aluminum plate is often used for cold storage, floor and outer packaging.2. Aluminum alloy pattern plate: It is processed with 3003 as the main raw material. This aluminum plate is also called rust proof aluminum plate, which is slightly stronger than ordinary aluminum alloy pattern plate and has a certain rust resistance.

Shandong Pingyin Chengye plate Co., Ltd. is a set of aluminum and aluminum alloy production and operation in one of the integrated enterprise, The main products are aluminum and aluminum alloy plate, aluminum coil, aluminum strip, aluminum foil, aluminum bar, aluminium pipe, aluminum wire, aluminum ingots and other products through the ISO9001: 2000 quality system certification. The company's prompt delivery, high quality and low price, service and thoughtful.

The selection of thermal insulation aluminum coil should pay attention to cost performance:1. We should not only pay attention to the price when purchasing thermal insulation aluminum coils, but also pay attention to the products based on the price. After all, the price is the same as the goods. We must pay attention to the products whose price is too low to avoid big losses due to greed. Of course, under the same circumstances, we should look at the price, and choose the cost-effective enterprise is our final choice.2.

The company's prompt delivery, high quality and low price, service and thoughtful. the special size can be customized according to customer requirements processing, complete specifications, the lowest price, factory direct sales, quality assurance, delivery: seven days or so.Production site: Shandong province Pingyin County village north hole aluminum plantPhone: 15064183919Biography: 0531-87886769Web site: www.sdalcoa.com

Patterned aluminum plate is mainly divided into five rib patterned aluminum plate, pointer patterned aluminum plate, orange peel patterned aluminum plate and bean patterned aluminum plate.The production process of patterned aluminum plate is embossed on the basis of aluminum plate to achieve beautiful effect. Patterned aluminum plate has anti-skid effect According to the different patterns, the pattern aluminum plate can be divided into anti-skid aluminum plate and aesthetic aluminum plate. The following series will explain these two kinds of aluminum plates.1、 Aesthetic.

Basic Instruction1060 aluminum plate is broadly used in products with low electricity necessities.

advantage1. Aluminum tiles (corrugated aluminum plates, corrugated aluminum plates, profiled aluminum plates) are light in weight, and their density is only one third of that of steel. For the same thickness, the price per square meter is calculated, and the price of steel and aluminum is almost the same.2. Corrugated aluminum plates (aluminum tiles, corrugated aluminum plates, profiled aluminum plates) are easy to process and form, and the construction is convenient and fast, greatly reducing the construction strength.3.

Al Mn series alloy is one of the most widely used antirust aluminum. This alloy has high strength, especially fatigue strength: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. It has good plasticity during semi cold work hardening, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability and polishing.

The representative 1000 series aluminum plate is also called pure aluminum plate. Among all the series, 1000 series belongs to the series with the largest aluminum content. The purity can reach more than 99.00%. Because it does not contain other technical elements, the production process is relatively simple and the price is relatively low. It is the most commonly used series in the conventional industry. Most of the 1050 and 1060 series are in circulation in the market. The minimum aluminum content of the 1000 series aluminum plate is determined according to the last two Arabic numerals.

Basic InstructionAluminum plate is significantly applied in products with low strength requirements.

1. Low density The density of aluminum and aluminum alloy is close to 2.7g /, about 1 / 3 of that of iron or copper. Aluminum and aluminum alloy have high strength. After a certain degree of cold working, the matrix strength can be strengthened, and some brands of aluminum alloys can also be strengthened by heat treatment. 2. Good conductivity The electrical and thermal conductivity of aluminum is second only to silver, copper and gold. 3.

Pure aluminum plate (the composition is basically rolled from pure aluminum)Alloy aluminum plate (consisting of aluminum and auxiliary alloys, usually aluminum copper, aluminum manganese, aluminum silicon, aluminum magnesium, etc.)Composite aluminum plate or brazing plate (aluminum plate material for special purpose is obtained by means of composite of multiple materials)Aluminum clad aluminum plate (aluminum plate is coated with thin aluminum plate for special purposes)2.

Basic InstructionAluminum coil additionally may be called antirust aluminum coil. The production gadget of 3000 series aluminum coil in China is particularly simple. 3000 series aluminum coil is specifically composed of manganese. The content material fabric is amongst 1.0-1.5. It is a sequence with correct antirust function. It is commonly applied in humid environments which incorporates air conditioner, refrigerator and car bottom. The price is higher than one thousand series. It is a more commonly used alloy series.ApplicationPacking

Decorative aluminum plate is a kind of material with high cost in construction plate. It is used more in the application field of furniture, such as refrigerator, handle and decorative strip, etc. It will be used in the decorative aluminum plate. The decorative aluminum plate has different classification according to the different plate. According to the different patterns can also be divided.

Basic Instruction1060 Aluminum plate is widely used in products with low strength requirements. Products are commonly used in signboards, billboards, building appearance decoration, bus body, wall decoration of high-rise buildings and factories, kitchen sink, lamp holder, fan blade, electronic parts, chemical instruments, sheet metal processing parts, deep drawing or spinning concave utensils, welding parts, heat exchangers, clock surface and disk surface, nameplates, kitchenware, decorations, reflective appliances, etc.SpecificationAI(%)Si(%)Cu(%)Mg(%)Zn(%)Mn(%)Ti(%)V(%)Fe(%)99,600.250.0

Technical parameters of production line:Coil width (mm): 500-1250800-14001000-1600Coil thickness (mm): 0.4-3.0, 1.0-6.0Coil weight (kg): 800010000Blanking diameter (mm): 85-660, 85-750100-900Blanking times (SPM): 40-55Nominal pressure of press (KN): 1250160020002500Alloy stateMost of them are 1 series, 3 series, 5 series, 6 series and 8 series.The status is O, h, etc.Technical parameters of production line:Coil width (mm): 500-1250800-14001000-1600Coil thickness (mm): 0.4-3.0, 1.0-6.0Coil weight (kg): 800010000Blanking diameter (mm): 85-660, 85-750100-900Blanking times (SPM): 40-55Nominal pres

classificationThe grade of aluminum alloy is representative. The following is an example of 7075T651 aluminum plate grade. The first 7 represents the aluminum and aluminum alloy group - aluminum zinc magnesium alloy. Aluminum and aluminum alloy groups are divided into nine categories.

3003 antirust aluminum coil plate has high aluminum content and smooth surface.

Basic Instruction1060 aluminum plate is broadly applied in products with low electricity necessities.

Basic Instruction1060 aluminum plate is extensively applied in merchandise with low strength requirements.