6063 custom extrusions-manufacture,factory,supplier from China

1. Pure aluminum plate: Material: 1050 / 1060 / 1070 / 1100 thickness: 0.1-500mm width: 10-2200mm2. Alloy aluminum plate: Material: 3003 / 5052 / 5754 / 5083 / 6061 / 6063 / 6082 / 7075 / 8011 thickness: 0.2-500mm width: 800-2800mm3. Curtain wall leveling aluminum plate: Material: 1060 / 1100, thickness: 0.95, 1.35, 1.5, 1.85, 2.0, 2.35, 2.5, 2.7, 2.85, 3.0mm, width: 800-1500mm2、 Aluminum coil: | aluminum foilMaterial: 1060 / 1100 / 8011 / 3003 / 3004 / 5052 thickness: 0.1-10mm width: 600-2000mm1.

Difference between aluminum oxidation and non oxidation:1. Oxidized aluminum will form a dense oxide film on the surface of the base, so the corrosion resistance will increase, and the melting boiling point will also increase. It can be used as a heat-resistant material, while non oxidized aluminum does not have these properties.2. Oxidized aluminum has a layer of oxide film, so it is corrosion-resistant and has more stable chemical properties than aluminum. In addition, aluminum can release hydrogen when it reacts with acid and alkali, and alumina has no gas.3.

Specific products are as follows:Aluminium (cold rolled sheet) (cold rolled aluminum sheet)Material 1060, 1100, 1050, 8011, 3003, 3004, 5052, 1145, 5083, 6061,Thickness 0.1mm---680mmWidth 800mm----3300mmAluminium coil (cold rolled coil)Material 1060, 1145, 1050, 12008011, 3003, 3004, 5052, 1100, 5083, 6061Thickness 0.10mm----10mmWidth 800mm----1900mmColor coated aluminum coil (embossed color coated aluminum coil (polyester): color coated aluminum coil, fluorocarbon color coated aluminum coil)

Patterned aluminum roll orange peel aluminum roll: patterned orange peel roll processed with 1060 Aluminum plate as the plate base, which can adapt to ordinary environment and is low in price. This pattern of aluminum coil is usually used in cold storage, floor and outer packaging.Patterned aluminum roll orange peel aluminum roll is also known as antirust aluminum plate. Its strength is slightly higher than that of ordinary aluminum alloy patterned coil, and it has certain antirust performance. However, its hardness and corrosion resistance are not up to 3000 series patterned plate.

classificationThe grade of aluminum alloy is representative. The following is an example of 7075T651 aluminum plate grade. The first 7 represents the aluminum and aluminum alloy group - aluminum zinc magnesium alloy. Aluminum and aluminum alloy groups are divided into nine categories.

1. Five ribbed aluminum alloy checkered plate: five ribbed anti-skid aluminum plate becomes willow shaped checkered plate and aluminum alloy checkered plate. It has good anti-skid ability and is widely used in building (floor) platform design. Because the patterns on the surface of the aluminum plate are arranged in a relatively parallel manner according to the five concave convex patterns, and there are 60 between each pattern and other patterns2. Compass aluminum alloy pattern plate: anti slip aluminum plate, which has the same effect as the five bars, but is not often used.3.

1. Low density The density of aluminum and aluminum alloy is close to 2.7 g, about 1/3 of that of iron or copper. The strength of aluminum and aluminum alloy is high. After a certain degree of cold working, the matrix strength can be strengthened, and some brands of aluminum alloys can also be strengthened by heat treatment. 2. Good conductivity The electrical and thermal conductivity of aluminum is only inferior to silver, copper and gold. 3.

Classification according to different aluminum sheet alloys1. Ordinary aluminum alloy pattern plate: the aluminum alloy pattern plate processed with 1060 aluminum plate as the plate base can adapt to the ordinary environment with low price. Usually, this kind of patterned aluminum plate is often used for cold storage, floor and outer packaging.2. Aluminum alloy pattern plate: It is processed with 3003 as the main raw material. This aluminum plate is also called rust proof aluminum plate, which is slightly stronger than ordinary aluminum alloy pattern plate and has a certain rust resistance.

Our company mainly engages in deep processing of aluminum sheet. Our leading products are aluminum plate, aluminum strip, aluminum foil, aluminum volume, aluminum pole, aluminum scrap, color-painted aluminum plate and volume, decorative pattern aluminum plate and volume and aluminum sheet circle. We have international advanced producing equipments as caster, hot mill, cold-rolling mill, etc. Our company has 100,000 tons’ annual production capacity. Our main products series are series 1, series 2, series 3, series 5, series 6 and series 8.

Basic InstructionMain products are aluminum and aluminum alloy plate, aluminum coil, aluminum strip, aluminum foil, aluminum rod, aluminum pipe, aluminum twine Aluminum ingots and extraordinary products have handed the 2000 version of ISO9001 quality system certification. Aluminum foil and extraordinary products have won the call of national, provincial and ministerial extremely good products.Installation lap diagramPackage and Delivery    

High quality aluminum skin，Cheap aluminum skin，Aluminum leather factory.Technical parameters of production line:Coil width (mm) : 500-1250800-14001000-1600Coil thickness (mm) : 0.4-3.0, 1.0-6.0Volume weight (kg) : 8000010000Cutting diameter (mm) : 85-660, 85-750100-900Blanking time (SPM) : 40-55Nominal pressure of press (kN) : 1250160020002500Alloy stateMost of them are 1, 3, 5, 6 and 8.The status is O or H.

Basic InstructionAluminum plate refers back to the square aluminum plate product of pure aluminum or aluminum alloy via stress processing (shearing or sawing) to achieve square pass segment and uniform thickness internationally, it's miles standard to name aluminum substances with thickness of greater than 0.2mm, a whole lot much less than 500mm, width of extra than 200mm and period of a whole lot much less than 16m as aluminum plate or aluminum sheet, less than 0.2mm as aluminum foil and width of a whole lot much less than 200mm as row or strip (of path, with the improvement of large mach

Basic InstructionThe aluminum plate of the anode is oxidized and a thin layer of alumina is formed on the surface. The anodized aluminum plate improves its hardness and placed on resistance, nicely heat resistance, the melting element of hard anodized film is as plenty as 2320k, superb insulation, breakdown voltage resistance is as plenty as 2000V, enhances the corrosion resistance, and does now not corrode in high-power salt spray for masses of hours.

Basic InstructionThe aluminum plate of the anode is oxidized and a thin layer of alumina is fashioned on the surface. The anodized aluminum plate improves its hardness and placed on resistance, well heat resistance, the melting issue of tough anodized film is as plenty as 2320k, super insulation, breakdown voltage resistance is as plenty as 2000V, enhances the corrosion resistance, and does now now not corrode in high-energy salt spray for loads of hours.

Basic InstructionThe aluminum plate of the anode is oxidized and a skinny layer of alumina is fashioned at the surface. The anodized aluminum plate improves its hardness and located on resistance, well warmth resistance, the melting detail of tough anodized movie is as masses as 2320k, exquisite insulation, breakdown voltage resistance is as masses as 2000V, complements the corrosion resistance, and does not corrode in high-electricity salt spray for loads of hours.

Basic InstructionThe aluminum plate of the anode is oxidized and a thin layer of alumina is formed on the surface. The anodized aluminum plate improves its hardness and placed on resistance, nicely heat resistance, the melting element of hard anodized film is as plenty as 2320k, superb insulation, breakdown voltage resistance is as plenty as 2000V, enhances the corrosion resistance, and does now not corrode in high-power salt spray for masses of hours.

Basic InstructionThe aluminum plate of the anode is oxidized and a skinny layer of alumina is shaped at the surface. The anodized aluminum plate improves its hardness and put on resistance, true warmness resistance, the melting factor of tough anodized movie is as much as 2320k, terrific insulation, breakdown voltage resistance is as much as 2000V, complements the corrosion resistance, and does now no longer corrode in high-power salt spray for heaps of hours.

Basic InstructionThe aluminum plate of the anode is oxidized and a skinny layer of alumina is shaped at the surface. The anodized aluminum plate improves its hardness and put on resistance, appropriate warmness resistance, the melting factor of tough anodized movie is as much as 2320k, great insulation, breakdown voltage resistance is as much as 2000V, complements the corrosion resistance, and does now no longer corrode in high-electricity salt spray for lots of hours.

Basic InstructionThe aluminum plate of the anode is oxidized and a skinny layer of alumina is fashioned at the surface. The anodized aluminum plate improves its hardness and located on resistance, well warmth resistance, the melting detail of tough anodized movie is as masses as 2320k, exquisite insulation, breakdown voltage resistance is as masses as 2000V, complements the corrosion resistance, and does not corrode in high-electricity salt spray for loads of hours.

Basic InstructionThe aluminum plate of the anode is oxidized and a skinny layer of alumina is fashioned at the surface. The anodized aluminum plate improves its hardness and put on resistance, suitable warmness resistance, the melting factor of tough anodized movie is as much as 2320k, awesome insulation, breakdown voltage resistance is as much as 2000V, complements the corrosion resistance, and does now no longer corrode in high-electricity salt spray for hundreds of hours.

Basic InstructionThe aluminum plate of the anode is oxidized and a thin layer of alumina is formed on the surface. The anodized aluminum plate improves its hardness and wear resistance, good heat resistance, the melting point of hard anodized film is up to 2320k, excellent insulation, breakdown voltage resistance is up to 2000V, enhances the corrosion resistance, and does not corrode in high-strength salt spray for thousands of hours. There are a large number of micropores in the thin layer of oxide film, which can absorb various lubricants and is suitable for manufacturing engine cy

Basic InstructionThe aluminum plate of the anode is oxidized and a thin layer of alumina is formed on the surface. The anodized aluminum plate improves its hardness and wear resistance, good heat resistance, the melting point of hard anodized film is up to 2320k, excellent insulation, breakdown voltage resistance is up to 2000V, enhances the corrosion resistance, and does not corrode in high-strength salt spray for thousands of hours. There are a large number of micropores in the thin layer of oxide film, which can absorb various lubricants and is suitable for manufacturing engine cy

Basic InstructionThe aluminum plate of the anode is oxidized and a skinny layer of alumina is long-hooked up at the surface. The anodized aluminum plate improves its hardness and positioned on resistance, suitable warm temperature resistance, the melting factor of difficult anodized movie is as loads as 2320k, extremely good insulation, breakdown voltage resistance is as loads as 2000V, complements the corrosion resistance, and does now no longer corrode in high-strength salt spray for hundreds of hours.

"Aluminum wafers aluminum wafers are widely used in electronics, daily chemicals, medicine, culture and education, and auto parts. Electrical appliances, thermal insulation, machinery manufacturing, automobile, aerospace, military industry, mold, construction, printing and other industries. Such as kitchen utensils such as non stick pots, pressure pans, and hardware supplies such as lampshades, water heater shells, and stretching tanks, it is one of the largest aluminum alloy plate and strip deep processing products."